WiMAX Industry
 

 
  Home News White Papers Buyers Guide  
      WiMAX News
      WiMAX Equipment
      WiMAX Billing Solutions
      VoIP over WiMAX
      WiMAX Vendors
      WiMAX Test Tools
      WiMAX Development
      WiMAX RSS Feeds
 

 
 

 WiMAX Buyers Guide
 

WiMAX Hardware

WiMAX Base Station

WiMAX CPE

WiMAX Antenna

WiMAX Equipment

WiMAX Cooling Systems

WiMAX Chips, Chipsets,
Boards & Components

WiMAX Turnkey

WiMAX PtP - Point-to-Point

WiMAX PtMP - Point-to-Multipoint

WiMAX Test Equipment

WiMAX Equipment Distributors

WiMAX Software

WiMAX Billing Software

WiMAX Test Software

WiMAX Mesh Networks

WiMAX Network Monitoring

WiMAX QoS Solutions -
Quality of Service

WiMAX Provisioning
Software

WiMAX Monitoring Software

WiMAX Software Distributors

WiMAX Services

WiMAX Installation
WiMAX Business Case

WiMAX Network Design

WiMAX Hosted Billing

WiMAX Networking

WiMAX WISPs ISPs

WiMAX Integrators

WiMAX Training

WiMAX Consulting

WiMAX Solutions

WiMAX Metro Area Networks (MANs)

WiMAX Campus Area
Networks

Military WiMAX Systems

WiMAX VoIP

WiMAX Backhaul
 

 

Submit your Site

Subscribe

 

 

WiMAX RSSI
 
 
 
Yellowjacket 802.11b/a/g/h Wi-Fi Analyzer

Yellowjacket® B/A/G is a wireless test receiver system that demodulates, sweeps, analyzes, and optimizes all popular 802.11 Wi-Fi network standards including 802.11b/g (2.4 GHz), 802.11a (5 GHz) and 802.11h (5.7 GHz). The calibrated receiver is a passive measurement device that is network independent so it remains "invisible" to any Wi-Fi network. Yellowjacket® B/A/G is also a powerful spectrum analyzer that measures RF energy allowing not only detailed interference analysis but the ability to see the "whole picture" of your 2.4 and 5 GHz network WISP or hotpsot. When equipped with a BVS DF (Direction Finding) antenna, Yellowjacket® B/A/G locates and pinpoints rogue APs and STAs and even detects spurious interference from sources such as microwave ovens and cordless phones. Powerful packet analysis features such as SNR (Signal-to-Noise), Multipath (Ec/Io), Delay Spread, Channel Frequency Response (CFR), SSID and Received Signal Strength Indicator (RSSI) give Yellowjacket® B/A/G the distinction of being the only true handheld RF spectrum protocol analysis and direction finding tool accurate to within 1 dB. Yellowjacket® B/A/G functions as a complete WLAN analysis system offering both measurements made through packet demodulation and spectrum analysis in a rugged, handheld package.

 Download Yellowjacket 802.11b/a/g/h data sheet
 
Features
  • Measure 2.4 GHz coverage for DSSS and OFDM WLANs within the IEEE 802.11b/g standard
  • Measure 5 GHz coverage for OFDM WLANs within the IEEE 802.11a standard
  • Measure 5.7 GHz coverage for the IEEE 802.11h standard
  • Receive, filter and process DSSS and OFDM studies all in a handheld Windows Mobile OS® environment
  • 802.11 packet Demodulation tools for Channel Frequency Response, Antenna Alignment and Signal-to-Noise ratio
  • Full Featured Spectrum Analysis including Power Triggers, Waveform Traces and Full Spectrum Sweep
  • Measure RSSI in true dBm with a calibrated receiver
  • Multipath and RSSI; narrow band & total channel power
  • Complex AP / STA list analysis including Multipath, Absolute Channel, and SSID
  • Rechargeable Internal Li-Poly battery or A/C power
  • RJ-45 Ethernet Port for fast, networked PC communication
  • MAC Security Authorization Lists/Detection/Alarms as well as WEP and WPA encryption detection
  • Optional Direction Finding antennae for locating rogue APs, WLAN hackers and spurious RF interference
  • Internal GPS receiver for realtime geo-coding of all measurements and optional Swarm™ mapping/validation coverage software
Back to Top
 
Demodulator Specifications
Bands Supported
2.4-2.5 GHz and 5-5.8 GHz
RF Sensitivity (Wide Band)
-20 to -90 dBm
Packet Preamble Demodulator and Analyzer
Multipath Measurement and Graphical Display
Correlated Power Measurements
Ratio
Correlated Power (dBm)
-30 dBm : -100 dBm
Correlated Power to Total Power Ec/Io (dB)
0 dB : -10 dB
Total Channel Power Measurement
-20 dBm : -80 dBm
SPECTRUM ANALYZER SPECIFICATIONS:
Bands Supported
2.4-2.5 GHz and 5-5.8 GHz
Average Noise Floor (no input)
< -100 dBm (reference level -70 dBm, resolution bandwidth=50 kHz)
Dynamic Range
> 40 dB
Level Accuracy
+ 1.5 dB (25º C)
Max Input (safe)
+ 0 dB
Max Input (no saturation)
-20 dB
Reference Level
-20 to -70 dBm (10 dB steps)
Display (iPAQ)
see HX2700 specifications
Operating System
Windows® Mobile 5.0
TRIGGERING:
User Control Auto or Manual
Packet/Interefrence Trigger Trigger analyzer when input power meets or exceeds threshold (20 MHz span)
Trigger Threshold User settable in dBm
Trigger Delay User settable in mS
GENERAL SPECIFICATIONS:  
Input Connector SMA Female 50 ohm
Power Li-PO, AC, DC
Runtime Internal Battery > 3 hours
Recharge Time < 3 hours
PHYSICAL SPECIFICATIONS:
Weight 3 lbs.
Dimensions 3" H x 5" W x 9 " L (water resistant, high-impact ABS plastic case)
INCLUDED ACCESSORIES:
2.4 GHz Omni-Directional Antenna, 5 GHz Omni-Directional Antenna, AC/DC Power
OPTIONAL ACCESSORIES:
12V car adapter, 2.4 GHz Directional Finding Antenna, 5 GHz Directional Finding Antenna
OPTIONAL DIRECTION FINDING ANTENNA :
Frequency 5.150-5.350 MHz
Gain 5 dBi
VSWR <2 : 1
Impedence 50 Ohm nominal
Beamwidth 75 degree vertical, 65 degree horizontal
Front-to-Back Ratio 22 dB or better
Material Powder-coated aluminum, ABS plastic radome
Weight 1 Lb.
Connector SMA attached at rear of antenna
Frequency 2300-2600 MHz
Gain 9 dBi
Bandwidth @ 2:1 SWR 200 MHz or better
Impedence 50 Ohm nominal
Beamwidth 75 degree vertical, 65 degree horizontal
Front-to-Back Ratio 22 dB or better
Material Powder-coated aluminum, ABS plastic radome
Weight 1 Lb.
Connector SMA attached at rear of antenna
Back to Top
 
Frequencies
  • 2.400-2.497 Ghz
  • 5.0-5.8 GHz
Back to Top
 
Software

The YellowJacket Data Logger is a software application for Windows® Mobile 5.0 that displays, records and logs all Wi-Fi data received by the YellowJacket® on the iPAQ® PocketPC® PDA. The software allows complete control of the YellowJacket IEEE 802.11 scanner. Data can be saved on the iPAQ for later replay and conversion. YellowJacket® runs Hive Indoor Mapping Software and Drone GPS-Based Wi-Fi Software which allows the users to create, modify and plot measurements in real-time on an iPAQ and PC.


Back to Top
 
Options
2.4 GHz Directional Corner Reflector 5 GHz Directional Corner Reflector
9 dBi gain 9 dBi gain
Back to Top
 
FAQs

Does the YellowJacket do both 802.11b/g and 802.11a studies?

Yes, the calibrated Yellowjacket receiver can detect and demodulate both 802.11b/g, 802.11a and even 802.11h packets.

How do I get GPS data for my 802.11 measurements?

 Yellowjacket 802.11b/a/g model contains an optional internal 12-channel GPS receiver for use in outdoor drive-studies for example.
Back to Top

 
 

Home

 White Papers Buyers Guide Company List

Trade Shows

 Billing Solutions RSS Feeds Test Tools
Training Advertising Contact Us Submit Site

copyright 2008, WiMAX Industry, all rights reserved worldwide