The TR-5a series is one of Tranzeo’s newer
generation of 5.8GHz product lines. Radios and systems described
below are powered by a 13 dBm radio. These are integrated fully
functioning radios, which means they can be configured as an Access
Point, a Point -to-Point Bridge, or a Client Adapter (CPE).
The Tranzeo TR-5Plus Series is one of the newest
additions to the Tranzeo Product line. The TR-5Plus Series of radios
are based on the TR-5A series but boasts a non-amplified radio that
has an output power of 23 dBm. Since there is no amplifier there is
a lower cost and better performance in High Noise environments.
Tranzeo's NEW EN-1000 Series in 2.4GHz & 5.8 GHz.
These units are based on the already successful 2.4 GHz TR-6600 and
5.8GHz TR-5Plus series platforms and have similar performance but
with many new feature add-ons.
Units can be set up in the following modes: Router Mode; Router Mode
with NAT; Bridge Mode.
The TR-6000 series of radio is Tranzeo's Point-to-Multipoint
solution in the 2.4 GHz frequency that can also double as a client
With features like Dual-Ethernet ports for easy daisy chaining of up
to 2 additional radios, Tunneling Protocol Support such as VPN,
PPTP, Alignment / Status LEDs, Security, NAT Routing and more, this
series can be configured to handle a multitude of situations and
configurations that will suit your needs for getting high-speed
broadband to your customers.
The TR-600 series are an Indoor Commercial grade of products
from Tranzeo Wireless.
The distance ranges referenced below for the various radios/
&radio/antenna systems, are conservatively stated. Actual
performance results may exceed (or occasionally be less) depending
on a variety of factors including but not restricted to: (a) line of
sight issues; (b) Fresnel zone issues; (c) towers heights (d) noise
floors; and: (e) spectrum issues such as interference.
For more information on our full product lines please contact us by
filling out the form below or calling 1-866-872-6936.