|
|
|
ZigBee aCT IEEE 802.15.4
Automated Compliance Testing Solution |
Overview
ZigBee aCT is a ZigBee Automated Compliance Testing solution that
executes a sequence of Tx and Rx tests to characterize a DUT's
compliance and performance in accordance with the IEEE 802.15.4
standard and generates detailed test reports This solution enables the
user to test the ZigBee DUTs with minimal user input requiring just
the configuration parameters to be input for each test.
The tests provided are optimized for speed to reduce test times and
are verified for their accuracy with various RF Chipsets from leading
manufacturers.
The software integrates with the National Instruments' vector signal
generator and analyzer hardware to provide a complete test-bench
solution. The main advantage of this solution includes test automation
with minimal user input and the ability to save test results in
easy-to-read report formats. ZigBee aCT performs several compliance
tests on any or all of the 16 frequency channels numbered 11 to 26.
With the help of the DUT's firmware, the control of the DUT is handled
by ZigBee aCT through RS-232 communication. The user can perform a
number of Rx tests including BER/PER tests with ease without requiring
external DUT-controller software.
|
|
|
|
Salient Features |
|
|
|
|
Automation of
multiple compliance tests |
|
|
Run All or
Selected Tx/Rx tests |
|
|
Detailed reports
for each test |
|
|
Save reports in .html or .xls
formats (view the sample reports :
HTML, .XLS
) |
|
|
Configure
individual Tests |
|
|
Load and Save test
configurations |
|
|
Configurable test
limits |
|
|
Optimized for
Speed to target manufacturing industry |
|
|
|
|
|
Compliance
Tests |
|
|
|
Tests |
Transmitter Tests |
Receiver Tests |
|
|
|
|
|
PLL Frequency Test |
 |
|
|
TX Gain Test |
|
|
|
Spurious Emission
Test |
|
|
|
Phase Noise Test |
|
|
|
IQ Measurements |
|
|
|
Power Spectral
Density |
|
|
|
Carrier
Suppression Test |
|
|
|
LO Leakage |
|
|
|
PER and BER Tests |
|
|
|
Adjacent/Alternate
Channel Rejections |
|
|
|
Maximum Input
Power Test |
|
|
|
|
|
|
System
Requirements |
|
|
 |
System Memory:
Minimum 512 MB; recommended 1GB |
|
|
Disk Space: 100 MB |
|
|
OS: Windows
2000/XP |
|
|
NI-PXI 5670 RF
Signal Generator |
|
|
NI PXI 5421 (AWG) |
|
|
NI PXI 5610 (Upconvertor) |
|
|
Drivers : NI PXI
RFSG 5670 Ver 1.1 or above |
|
|
NI-PXI 5660 RF
Signal Analyser |
|
|
NI PXI 5600 (Downconvertor) |
|
|
NI PXI 5620
(Digitizer) |
|
|
Drivers : NI PXI
RFSA 5660 Ver 1.5 or above |
|
|
Power Combiner |
|
|
LabVIEW Runtime
Engine 7.1 |
|
|
|
|
|
|
|
|
|
Request quote or Information
|
|
|
